1962-70 Ford Fairlane Drag Pac Suspension Kit

Part #:DP6265S

$1394.12

Oversized?:

yes

Year of Vehicle

Leaf Spring Height

Details

Performance Online's new Drag Pack for 1962-70 Ford Fairlane gives your suspension just what it needs to stay in front.

Kit Includes:

Rear Split Mono Leaf Springs:
The Split-Mono leaf spring overlaps 12", extending 6" on each side of the axle tube. The overlap extends over the high stress area of the spring emulating a parabolic type spring. Proven to withstand over 1200 HP and quarter mile ET's in the low 9's and is lighter for less unsprung weight. 1962-65 models require spring hanger #H64

Energy Suspension poly urethane bushings supplied for rear eyes
200lb. - 225lb. Spring Rate
Ride height available stock and 1" lowered.
Heavy duty alignment spring pins & clamps.\
Due to the nature of these springs, requires center bolt modifications & grinding to fit.

Cal Trac Traction Bar Kit

These components change the pushing point on the car by redirecting the turning action (spring wrap-up) of the rear axle through the force transfer link into the front pivot. The Front Pivot Spring Stop resists this turning motion and also controls the bending of the leaf spring at it's thinnest section. The push into the Front Pivot helps the weight shift towards the rear of the car, because of new directed angle of force toward the front of the vehicle. (The 'Instant Center' moves further forward). This is where the system emulates a 4 link system. The pinion angle is also maintained.

Calvert Racing CF Series 90/10 Front Drag Race Shocks

Fastest rate of separation over any other shock on the market today.
Dual Stage Compression Valving - High speed compression valving will keep the front end from bottoming out on hard landings
Absorbs hard hits & settles on the top end
Light weight design

Calvert Racing CR Series 9 Way Adjustable Rear Shocks