RideTech 30142000 - 2-Way Analog Compressor System, 3 Gallon

By today's standards, we recommend that a 4 way control system be used to control your air suspension. There are several benefits: It cures air transfer problems.  You have the ability to level the vehicle. Compensate air pressure for extra weight, suspension bind, or to overcome alignment changes as the vehicle is raising or lowering. Faster response times. It raises the vehicle faster because you have 4 orifices flowing air instead of 2. At this point the only reason to use a 2 way system is if your vehicle has only 2 airsprings.

Kit includes:

• 1- ARC5001 Thomas 327 air compressor
• 1- ARV2500 Ridepro airvalve assembly
• 1- CON2500 RidePro control panel (with electrical switches)
• 1- TANK3100 3 gallon aluminum air tank
• 2- ARL2000 30 ft. roll of 1/4” DOT airline
• 1- ARL1000 1/8” airline (25 feet) manifold to gauges
• 1- WIR1010A RidePro 10 foot extension harness with molded plug
• 1- PRE1500 150psi pressure switch
• 1- FIT2150 1/8” npt x ¼” tube for end of nipple
• 1- FIT7003 2” pipe nipple for compressor
• 2- FIT4400 1/4” airline tee
• 4- FIT4201 elbow airline fitting
• 5- FIT4000 1/4 x 1/4 male straight fitting supply to manifold/ out to airspring
• 2- FIT2000 1/8npt x 1/8 tube straight fitting manifold to gauge fitting
• 1- FIT7004 1/4 Hex head pipe plug to plug unused supply port