PERFORMANCE PARTS FOR YOUR CLASSICS!
Local: 714-278-0098 TF: 800-638-1703
Home / Brakes / Universal Brake Parts / Hydropower Hydraulic Brake Assist Booster Kit
Performance Online (POL)

Hydropower Hydraulic Brake Assist Booster Kit

Hydropower Hydraulic Brake Assist Booster Kit
Hydro Boost Brake Booster Hydroboost Hose Kit install Hydro Boost orientation
Part #:HB-0000
$509.05

Details

The Hydropower is powered by hydraulic pressure from the power steering pump. It requires 'no vacuum'. There are many advantages to the design of this hydraulic assisted power brake unit.

  • No external vacuum pump required on low vacuum high performance motors
  • Firewall and valve cover clearance is increased dimensionally the same as a 7" diameter vacuum booster
  • Frame mounted clearance is increased
  • Frame mounted Hydropower brake booster are the same width as a master cylinder, giving additional exhaust clearance

The Hydropower can be fitted any where a vacuum booster will fit. It can use stainless braided hoses or rubber type and brackets are available for most applications.
This power brake booster uses fluid pressure from the existing power steering pump. The average power steering pump puts out from 800psi to 1400psi. The Hydropower unit uses this pressure to convert to pressure to apply against the master cylinder. Improving stopping performance and driver feedback tremendously. 

Steering hose hookup kits available in the Suggested Parts below. These are new reproduction boosters. Hydropower® is a registered trademark of the Robert Corporation

Kit includes:

  • Hydropower brake booster
  • Industry standard mounting plate 3.375" x 3.375" bolt pattern
  • Industry standard 3/8"-24 threaded pedal push rod 

Notes:

Can not be used with Wilwood master cylinders that are 1.00" piston bore diameter or smaller. 
See detailed image for fitting sizes and installation layout
CA Prop 65 Warning - cancer and reproductive harm www.p65warnings.ca.gov

Suggested parts

Customers also bought