Part # BBF-T5356
NOTE: Booster may differ from picture depending on type of booster options you have chosen.
STEPS: Read these instructions carefully!
Important: This kit is assembled for shipping purposes only! Be sure to
check all nuts and bolts for adequate torque prior to use. Don’t forget!
Make sure this kit fits your application prior to painting or plating. Note
that chroming or painting the booster can cause it to malfunction if not
done properly. Parts that have been plated, painted or modified may not
be returned.
- Installation of this kit requires the removal of the stock steering
column brace. The stock steering column brace is the shaded area in FIG 1. The spot welds need to be broken or drilled out to remove this brace. - When the brace is removed, a 2-1/2” hole must be drilled with a hole
saw 7” from the firewall seam edge and 8-1/2” in from the hood hinge
bolts. Mount the brackets to the steering column drop mount holes. Line up the 2-1/2” holes in the bracket and the firewall and clamp in place. Use the bracket as a guide to drill the 1/2” mounting holes.
PARTS:
1 – POWER BRAKE BOOSTER
1 – MASTER CYLINDER
1 – BOOSTER MOUNTING BRACKET
1 – PEDAL PUSH ROD ASSEMBLY
