Your original Cross Shafts are to be used. You must grind off 1/8” on each side and radius edges as shown. This only has to be done on one side of each shaft. This will allow shaft to pass thru loop on the A-frame.
Home :: Tech Information :: Cross Shafts
Your original Cross Shafts are to be used. You must grind off 1/8” on each side and radius edges as shown. This only has to be done on one side of each shaft. This will allow shaft to pass thru loop on the A-frame.
Performance Online (POL)
1550 Melissa Court
Corona, CA 92879
© 2024 POL - Performance Online, Inc.