Performance Online (POL)
1973-87 Chevy C10, GMC C15 Truck Tubular Upper and Lower Control Arm Set
Details
Our 1973-87 Chevy and GMC truck tubular upper and lower control arm design helps to correct the camber and ball joint angle problems often found when using a drop spindle or lowered coil spring. We then designed an extra 2.0 degrees of caster into the arm to make the vehicle drive straight and true. These arms come with factory early model cross shafts for ease of installation and increased ground clearence. Works with drop spindles. Corrects geometry for lowered applications. Requires use of aftermarket sway bar.
Kit includes:
- 2 upper control arms
- 2 lower control arms
- Gloss Black powder coated
- 1.250" x .188" DOM tubing
- 4 cross shafts (installed)
- 2 lower ball joints (If applicable)
- 2 upper ball joints (If applicable)
- Hardware
- Limited Lifetime Warranty
- Sold in sets
Notes:
Hollow Front Sway Bar Recommended
Complete and ready to bolt on.
Complete and ready to bolt on.
CA Prop 65 Warning - cancer and reproductive harm www.p65warnings.ca.gov
What does this fit?
1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevy C10, GMC C15 truck, Suburban and 2wd Blazer