1962-82 Mopar Power Steering Gear Box Conversion, Quick Ratio
Details
Performance Online (POL) 1962-82 Mopar power steering gear box really improves the steering feel in your vehicle. The addition of this steering part enhances performance and driver comfort. This power steering conversion upgrade is for the 1962-72 Mopar A,B,C and E Body cars with 1-1/8" diameter sector shaft and 1965-82 A, B, C, E and F Body cars with 1-1/4" sector shaft. Gear box bolts to the stock mounting location and connects to the original pitman arm. Conversion box is a quick 14:1 ratio with a firm modern feel. Steering column will need to be modified for installation. Connection to aftermarket columns will vary. Our power steering gear boxes are manufactured to precise specifications and tolerances. These kits are available for both small and big block engine combinations and cars that came with manual or factory power steering.
Kit includes:
- Gear Box Input shaft: 11/16"-36 spline
- Pitman Arm Shaft: 1-1/8" Mopar with 32 splines and 4 master splines
- Pressure Port: 16mm X 1.5 Flare (Located closest to engine)
- Return Port: 16mm X 1.5 Flare (Located closest to input shaft)
- Maximum Pressure: 1450 PSI Maximum Operating Pressure, 1100-1250 Optimal
- Flow Rate: 2.0-2.5 GPM Flow Rate Recommended
Notes:
The original steering column shaft will need to be cut and shortened for installation.
Connection to the box is then made by drilling and pinning our #036425 Mopar vibration reducing universal joint coupling to the shortened steering column shaft.
Drill bit and pins included with coupler.
